35
CA1000
CA1000
EN
AIR PURIFYING SYSTEM
Improve the air quality in the room with the new air purifying system. Multi-level purifying combines the effects of
the HEPA filter that traps the allergens and the carbon filter that removes odours to make one powerful system. UV-C
light takes care of bacteria.
PRE-FILTER:
It captures dust particles and allergens.
ACTIVATED CHARCOAL FILTER
It absorbs formaldehyde, benzene and other harmful gases.
HEPA FILTER:
It captures fine dust, smoke, pollen, and other allergens.
UV-C LAMP:
It keeps the air clean of microorganisms such as bacteria, viruses and fungi (such as toxic moulds).
OPERATION MANUAL
BEFORE FIRST USE OF THE APPLIANCE
1. Carefully remove the air purifier from the packaging.
2. Place the appliance on a stable, flat surface.
To make the best out of the appliance, place it at least 30 cm away from walls and furniture.
Make sure none of the grids is blocked.
3. Take out the filters and remove all plastic packaging prior to first use.
4. Connect the appliance plug into an AC outlet with a correct voltage.
IMPORTANT
: Always grasp the handle on the back of the cleaner when moving the appliance.
1. ON / OFF / UV-C LAMP / IONIZER BUTTON:
Press the button once to turn the appliance on, the UV lamp and ionizer will be off.
Press the button for the second time to turn the UV lamp and ionizer on.
Press the button for the third time to turn the lamp and ionizer off.
Press the button for the fourth time to turn the whole appliance off.
2. SPEED SETTING BUTTON:
The ventilator speed (I, II, III) can be adjusted during operation. Each time the button is pressed, the speed increases
from I (low speed) to II (medium speed) and to III (high speed).
POWER UV-C/ION
II
III
2H 4H 8H
I
REPLACE
FILTER
UV-C/