2RT0435T
Target Description and Application Manual
www.IGBT-Driver.com
Page 8
Recommended Assembly of Components
Recommended components and component values are given in the bill of material included in the production
documentation of the Base Boards. However, some components which depend on the voltage class of the
power semiconductor used are marked with N.A. in the schematics. See also Fig. 6. They are given below.
Note that gate resistor values are not explicitly given as they depend on the power semiconductor used and on
the application. The gate resistors must be determined and assembled by the user.
2RT0435T2A0-12
The following components marked with N.A. in the schematics and in Fig. 6 are recommended:
D106…D108, D206…D208:
1.5KE220A-E3 (e.g. from Vishay)
D109, D209:
1.5KE250CA-E3 (e.g. from Vishay)
2RT0435T2A0-17
The following components marked with N.A. in the schematics and in Fig. 6 are recommended:
D106…D108, D206…D208:
1.5KE350A-E3 (e.g. from Vishay)
D109, D209:
1.5KE300CA-E3 (e.g. from Vishay)
Fig. 6: Schematic of the secondary side of the Base Board 2RT0435T