2RT0435T
Target Description and Application Manual
www.IGBT-Driver.com
Page 7
Assembly Drawing of Gate Resistors
The turn-on and turn-off gate resistors of 2RT0435T Base Boards are not assembled. They must be assembled
by the user.
Recommended gate resistors are PR03 / 3W / 1% (THT), e.g. from Vishay.
The component positions can be found in Fig. 4:
Fig. 4: Assembly drawing of 2RT0435T with highlighted gate resistors
Turn-on gate resistors for channel 1: R112 and R113 in parallel
Turn-off gate resistors for channel 1: R110 and R111 in parallel
Turn-on gate resistors for channel 2: R212 and R213 in parallel
Turn-off gate resistors for channel 2: R210 and R211 in parallel
Note that the wires of the THT gate resistors should not project more than 1.6mm after soldering (excess
length at bottom side). Furthermore, a minimum distance of 1mm must be maintained between the gate
resistor body and the PCB (see Fig. 5).
Fig. 5: Minimum and maximum distances when soldering THT gate resistors (in mm/mil)