Concept2 2RT0435T Applications Manual Download Page 15

2RT0435T 

 

Target Description and Application Manual 

 

www.IGBT-Driver.com 

Page 15 

The Information Source: SCALE-2 Driver Data Sheets 

CONCEPT offers the widest selection of gate drivers for power MOSFETs and IGBTs for almost any application 

needs. The largest website on gate-drive circuitry anywhere contains all data sheets, application notes and 

manuals, technical information and support sections: 

www.IGBT-Driver.com

 

Quite Special: Customized SCALE-2 Drivers 

If you need an IGBT driver that is not included in the delivery range, please don’t hesitate to contact CONCEPT 

or your CONCEPT sales partner. 
CONCEPT has more than 25 years experience in the development and manufacture of intelligent gate drivers 

for power MOSFETs and IGBTs and has already implemented a large number of customized solutions. 

Technical Support 

CONCEPT provides expert help with your questions and problems: 

www.IGBT-Driver.com/go/support

 

Quality 

The obligation to high quality is one of the central features laid down in the mission statement of CT-Concept 

Technologie GmbH. The quality management system covers all stages of product development and production 

up to delivery. The drivers of the SCALE-2 series are manufactured to the ISO9001:2000 quality standard. 

Legal Disclaimer 

The statements, technical information and recommendations contained herein are believed to be accurate as 
of the date hereof. All parameters, numbers, values and other technical data included in the technical 

information were calculated and determined to our best knowledge in accordance with the relevant technical 

norms (if any). They may base on assumptions or operational conditions that do not necessarily apply in 

general. We exclude any representation or warranty, express or implied, in relation to the accuracy or 

completeness of the statements, technical information and recommendations contained herein.  
No responsibility is accepted for the accuracy or sufficiency of any of the statements, technical information, 
recommendations or opinions communicated and any liability for any direct, indirect or consequential loss or 

damage suffered by any person arising therefrom is expressly disclaimed. 
 

 

Summary of Contents for 2RT0435T

















Reviews: