Concept Pro VXH5AHDL-16, Quick Start Manual

Page: 12 / 16

VXH5AHDL QUICK START GUIDE
9
ACCESSING FROM THE VIEWER APP
Connect to router or switch with router attached via a network patch cable.
Navigate to the network menu in the recorder and either select DHCP or alternatively
statically assign a valid IP address for your local network.
Apply all settings and select Close
DVR SETUP
Select Menu at the bottom left hand corner of the screen and select Sequrinet at the
top of the list. A QR code will appear.
Going back to your App on your smart phone, tap on the QR code icon and point the
phone at the QR code on the DVR. The phone will scan the code and the Mac code will
populate the address section on the phone.
Tap on the DVR/NVR Nickname section and add a unique name for the connection
(You can enter anything here)
Tap on the DVR/NVR ID section and enter the username in here (Please enter ADMIN)
Tap on the DVR/NVR Password section and enter the default password or any
password you have programmed on the DVR
Tap Done then Save .
Your connection will now be saved and ready for selection