Concept Pro VXH264-4, User Manual

Page: 28 / 60

25
CONFIGURING THE VXH264
SYSTEm
To set-up the various system options, highlight SYSTEM and press ENTER
DATE TIME: Allows the operator to set or modify the current date & time.
DATE FORMAT: Determines how the date is displayed.
TIME FORMAT: Determines how the time is displayed.
NETWORK TIME SERVER SETUP: If the VXH264 is connected to the Internet, the time and
date can be accurately set by selecting SYNC and pressing
ENTER .
TIME ZONE SETUP: Should be set according to the region that the VXH264 is used in.
D.S.T.: When set to ON, the VXH264 will automatically adjust the time by one hour on the
relevant date in spring and autumn.
SYSTEM: DATE/TIME
SYSTEM: SYSTEM MANAGEMENT
Select INFO to display
F/W VERSION: Shows the firmware version of the VXH264.
H/W VERSION: Shows the hardware version of the VXH264.
VIDEO SIGNAL TYPE: The VXH264 can be selected between PAL and NTSC via a selector
switch on the rear panel (Default PAL).
DISK CAPACITY: Shows the total hard drive capacity installed.
IP ADDRESS: Shows either the manual IP address entered in NETWORK setup or the IP
address assigned by a DHCP server if enabled.
MAC ADDRESS: Shows the MAC (Media Access Control) address of the VXH264. It is unique
– no other network device has this MAC address.
DDNS DOMAIN NAME: If DDNS is enabled, the host DDNS server is specified here.
RTSP SERVICE PORT: The port number the DVR uses for internal networks.
WEB SERVER PORT: The port number that the DVR uses to support remote I.E conections.
Note this is for information only not for the setup.