22
CONFIGURING THE VXH264
DISPLAY
DISPLAY: SEQUENCE
Press the DISPLAY button on the status bar.
Press the sequence button.
The default sequence will cycle through all 4 channels,
one by one.
Sequence setup allows the operator to define a custom sequence using either single or quad
display screens.
To add a new sequence, highlight ADD and press
ENTER
.
Sequence title is highlighted – press
ENTER
to bring up the virtual keyboard and key in a
name or reference number for the new sequence.
Move around the virtual keyboard using the
CURSOR KEYS
and
ENTER
to select a
character.
To delete a character, use
Á
.
To change keyboard case and use the A/a located on the bottom right of the virtual keyboard.
To exit, press
RETURN
.
Press ADD to show the SEQUENCE SET-UP SYSTEM screen. This represents the first
sequence screen that will be displayed. Select the VIEW TYPE (Single or Quad view) and
press
ENTER.
Set SCHEDULE to ON, highlight MODIFY and press
ENTER
to display the sequence
programming screen.
When the correct screen type is displayed use the
CURSOR KEYS
to configure the channels
required for each portion of the quad screen.
Note: Only one instance of each channel can be displayed.
Summary of Contents for VXH264-4
Page 1: ...H 264 4 Channel Digital Recording System User Manual V X H264 4...
Page 58: ...55 Notes...
Page 59: ...56 Notes...
