Concept Pro VXH264-4, User Manual

Page: 10 / 60

7
CONFIGURING THE LIVE DISPLAY
mULTI ScREEN mOdE
3 different display modes are supported by the 4 channel VXH264.
By repeatedly pressing the
DISPLAY button, the operator can choose between single, quad
screen and basic sequence
All the display modes are static with the exception of the sequence mode. In this mode, the
sequence symbol (
) is displayed and each channel is shown in full screen for a set period
of time (default 5 seconds) before switching to the next channel. The sequence runs
indefinitely until a different display mode is chosen.
To view a particular channel in full screen, press the corresponding CHANNEL
SELECTION button.
Pressing the same CHANNEL SELECTION button again will switch the display back to
the last selected multi screen mode.
If audio recording is enabled for a selected channel, the chosen audio source is
automatically played when that channel is viewed in full screen.
cHOOSING cHANNELS