INSTALLATION
l
Use the supplied mounting template
to mark the spacing for drilling.
l
Following drilling, securely attach the
bracket and camera to the wall.
FIXING TO A WALL
Important: Ensure all precautions are observed during installation.
It is recommended the camera is tested during the most demanding environmental conditions
such as low light or bright sunlight to ensure continuity of effective CCTV monitoring. You may
find the use of an ND filter helpful.
Remove the camera unit carefully from the box,and keep the
accessories in a safe place.
3
MOUNTING TEMPLATE
CONNECTION
Power Connector
Network RJ45 Connector
Audio Output
Audio Input
Alarm Cable
Troubleshooting
l
Ensure all power and cable connections are correct with the Camera, NVR and Test monitor
or Telemetry devices if used.
l
Power Voltage Check - Remove the OSD cover to see if the green correct power LED is lit. If
the red LED is lit the power voltage is too high. If the yellow LED is lit the power voltage is
not high enough. If there are no LEDs lit there is no power getting to the camera
l
If all power and cable connections are correct and the camera picture can not be produced or
configured then contact your supplier for technical support.
