LED Indications
Message Indicator Status
Message Indicator is consistently
flashing slowly.
Message indicator flashes to indicate
number of messages received and
then repeats
Message Indicator flashes rapidly.
Message Indicator is lit solid.
Reason
No greeting message has been
recorded.
A 9 volt alkaline battery
(not included) has not been
installed or needs to be replaced.
Messages have been received.
System is in Answer Mode.
Actions
Record your greeting. See
section on recording your
greeting (below).
Install a fresh 9 volt alkaline
battery. (Battery provides
power failure backup. Unit is
functional without it).
Press PLAY control to hear
your messages.
No action required. Unit is
ready to receive calls.
7
Installation (Cont.)
Figure B
To Extension Phone
To Extension Phone
Recording Your Greeting
3. When finished, release button.
Note:
You have 30 seconds recording time
for your outgoing message. If your unit
beeps while you are recording, you have
exceeded the time limit. Record a shorter
outgoing message.
2. After you hear one beep tone, speak
clearly towards the built in microphone.
You have a maximum of 30 seconds to
record your GREETING.
To record your own personalized outgoing
greeting:
1. Press and hold down the
GREETING control.
