Conair VRU, User Manual

Page: 22 / 24

6-2 I Troubleshooting
Before Beginning
You can avoid most problems by following the recommended installation, operation and
maintenance procedures outlined in this User Guide. If you have a problem, this section
will help you determine the cause and tell you how to fix it.
Before you begin troubleshooting:
r
Find any wiring, parts, and assembly diagrams that were shipped with your
equipment.
These are the best reference for correcting a problem. The diagrams
will note any custom features or options not covered in this User Guide.
r
Verify that you have all instructional materials related to the W Series Dryer.
Additional details about troubleshooting and repairing specific components are found
in these materials.
r
Check that you have manual for other equipment connected in the system.
Troubleshooting may require investigating other equipment attached to, or connected
with the control.
A Few Words of Caution
WARNING: Improper installation, operation or
servicing may result in equipment damage or
personal injury.
This equipment should only be installed, adjusted, and serviced by qualified tech-
nical personnel who are familiar with the construction, operation, and potential
hazards of this type of machine.
All wiring, disconnects, and fuses should be installed and adjusted by qualified
electrical technicians in accordance with electrical codes in your region. Always
maintain a safe ground. Do not operate the equipment at power levels other than
what is specified on the machine serial tag and data plate.