setting without shutting off and cooling down. In this setting the
iron will still shut down if left motionless face down or on its side,
or if dropped.
*NOTE: WHEN THIS FEATURE IS ACTIVATED, THE IRON WILL
NOT SHUT OFF IF LEFT MOTIONLESS WHEN RESTING ON ITS
HEEL (SEE IMAGE)
To activate the Crafters’ Setting:
1. When the iron is turned off, press and hold the power on/off
button for over three seconds.
2. The Auto Off Indicator will blink on and off which indicates that
the heel rest auto shutoff has been disabled.
3. The iron will remain heated at the selected fabric setting until you
power off or unplug the iron.
To disable the Crafters’ Setting
1. Push the on/off button to shut off the iron, and then unplug
the iron.
OPERATING INSTRUCTIONS
Preparing for first use
Before first use, remove all labels from the soleplate and housing.
Before you use the iron to press fabrics for the first time, heat it to
the highest temperature setting without adding any water (see
“selecting fabric settings”), then turn the iron off, allow to cool, and
unplug iron.
1. Fill the water tank with unsoftened tap water or spring water
a. Open the fill door.
b. Using a clean measuring cup, slowly fill the tank until
the water reaches the “Max” indicator. DO NOT OVERFILL.
c. Close the fill door and wipe off any water that may have
spilled on the outside of the iron with a soft clean cloth.
2. Set the iron on a stable, flat surface when selecting the settings.
We recommend using a quality ironing board as the pressing
surface. Be sure to give yourself enough room to maneuver the iron
when pressing.
Soleplate
The soleplate on this iron has a curved design at
the tip which makes it much easier to press
between shirt buttons, and around collars and
other details on your garments.
4-way Automatic Shutoff
This iron will shut down if left motionless on its heel, on its side,
facedown or if dropped.
The auto shutoff icon will appear.
If dropped, the iron display will flash. Unplug, and inspect for damage.
Discontinue use if damage is detected.
CordKeeper™
This iron may have been equipped with a
CordKeeper™ for convenient storage of the
power cord. Grasp the cord and slowly pull
out to the length that you need for pressing –
do not pull past the red mark. When you need
to store the iron, grasp the plug with one hand
and push the button on the top of the
CordKeeper
™
to retract the cord. Be careful not
to let the cord snap back towards your body.
Crafters’ Setting*
If you are involved in a lengthy craft project
that requires pressing such items as seams,
you can bypass the heel rest/auto shutoff. This
enables the iron to stay heated to the fabric
10 minutes
30 seconds
30 seconds
Instant
Heel Rest
05CN1258 DPP3000C IB 11/17/05 11:52 AM Page 6
