background image

Redial Button

Automatically redials last number called (up to 32 digits). If the
number was busy or unanswered:
1. Lift the HANDSET.
2. Press [Redial].

TELEPHONE OPERATION

Receiving a Call

1. When your phone rings, pick up the handset and use it like

any basic telephone.

2. Hang up the handset to release the telephone line when your

conversation is completed.

Dialing a Call

1. Pick up the phone and wait for a dial tone.
2. Press the keypad for the telephone number you wish to dial.

Tone/Pulse Combination Dialing

Combination dialing is useful to subscribers of Pulse (rotary)
service who wish to gain access to various low-cost long-
distance or automated computer services otherwise not available
to them.
1. With the Tone/Pulse switch in the Pulse position, dial the

phone number.

2. Press [

*

], and your telephone will change to Tone dialing

mode.

3. Dial your code/authorization number. When your call is

completed, your telephone will automatically return to the
PULSE dialing mode.

NOTE:

 Combination dialing can also be stored into the memory

for one-touch access to your long distance or automated
computer service.

7

8

9

BASIC MEMORY PROGRAMMING

The CID110 comes with 10-memory dialing.

NOTE: 

Your local phone company restricts the time you can

have the handset off the base (off-hook).

YOU SHOULD PROGRAM THE CID110 MEMORY WITH THE
LINE CORD UNPLUGGED FROM THE WALL, IF YOU ARE
GOING TO PROGRAM MORE THAN ONE PHONE NUMBER.

Pick up the handset, and press [Store] to enter memory store.

Press the keypad to enter the number that you want to program.
The LCD on the back of the handset confirms the numbers you
entered.

Press [Store]. The ‘MEM’ will be displayed on the right corner of
LCD.

Press the memory location (0 to 9) on the keypad. The LCD will
then return to the ‘Answer-Ready’ mode, and display the total
call counter, new call counter, current time and date.

Copy from the Caller ID to Telephone Memory

Press [ ] or [ ] until the Caller ID memory location to be copied
appears on the LCD. Press  [Store] twice to enter memory store.
The  ‘MEM’ will be displayed on the right corner.

Press the memory location (0 to 9) on the keypad. The LCD will
then return to the ‘Answer-Ready’ mode, and display the total
call counter, new call counter, current time and date.
If no key is pressed within 20 seconds, the LCD will return to
‘Answer-Ready’ mode.

Repeat the above steps to store a different number in the same
speed dial location, or to store a new number in a different speed
dial location.

NOTES:

• Pressing [Redial] will place a 4-second PAUSE into the

number. Which may be required for accessing special phone
services.

• You can store a number with up to 16 digits maximum. Only

the last 14 digits will be displayed.

MEMORY DIALING

Pick up the handset to make your call.
Press [MEM] [0] ... [MEM] [9] for one of the 10 memory locations
to be dialed.

NOTE:

 Remember to plug the telephone line cord back into the

wall.

CALLER ID OPERATION

NOTE: Batteries must be installed, or Caller ID operations will
not work properly (see “To Install Batteries”).

If an incorrect, invalid or incomplete
Caller ID signal is received, the LCD
shows ‘-LINE ERROR-’.

If only the caller’s phone number is
received, the LCD shows the caller’s
phone number with the time and date it
was received. The ‘NEW’ icon turns on and New Call LED blinks.

If both the caller’s name and phone
number are received, the LCD shows the
caller’s name and phone number with
the time and date it was received. The ‘NEW’ icon turns on and
New Call LED blinks.

If the name and number are not available
due to the caller’s restriction, the LCD
shows ‘-PRIVATE CALL-’ with the time
and date received. The ‘NEW’ icon turns on and New Call LED
blinks.

Summary of Contents for ConairPhone CID110








Reviews: