If the name and number are not
a v a i l a b l e , t h e L C D w i l l s h o w
‘-UNAVAILABLE-’ with the call’s time and
date. The ‘NEW’ icon turns on and New Call LED blinks.
If no key is pressed within 20 seconds,
the LCD will show the ‘Answer-Ready’
mode, and display the total call counter,
new call counter, current time and date.
VIEW THE CALLER ID MEMORY
If you have new calls (‘NEW’ icon and New Call LED is lit). Press
[ ] or [ ] to read all of the most recent calls. The CALL# will
decrease.
Once all the new calls have been read, ‘END OF NEW CALL’
will be displayed.
Press [ ] to view the oldest calls, or press [ ] to view the most
recent calls.
NOTE:
After you view all the call in memory, the LCD will show
‘END OF LIST’.
NOTES:
1. The New Call LED will blink until all the new Caller ID data
has been reviewed.
2. If the ‘RPT’ icon is turned on, you have received multiple NEW
calls from the same number.
3. If you receive a call from a number stored in (previously
reviewed) memory, the data in memory will be replaced with
the new call’s time and date and the ‘NEW’ icon will be turned
on.
If no key is pressed within 20 seconds, the LCD will show the
‘Answer-Ready’ mode, and display the total call counter, new
call counter, current time and date.
10
11
12
ERASE THE CALLER ID MEMORY
Press [ ] or [ ] for the Caller ID memory location to be reviewed.
To clear a single Caller ID memory location, press [ERASE]
twice quickly.
The data for that call will be erased, and the CALL# and Caller
ID information will be updated.
After all new message being reviewed, press and hold [ERASE]
for 3 seconds. The message ‘ERASE ALL CALLS?’ will appear
to confirm your action. Press [ERASE] to clear all the information,
then the message ‘NO CALLS’ appear.
Both the total call and new call counters will become zero, and
the current time and date will be displayed.
NOTE:
All new calls must be reviewed before clearing the entire
memory.
CALL BACK (REDIAL) FROM THE
CALLER ID MEMORY
With the handset hung up on the base press [ ] or [ ] to find the
Caller ID memory location to be redialed.
Press [CALL BACK] twice to redial, the LCD shows ‘LIFT
HANDSET’ or ‘PICK UP CALL’.
Pick up the handset to make your phone call.
With the handset off hook, press [ ] or [ ] to find the Caller ID
memory location to be redialed. Press [CALL BACK] twice, the
number will then be dialed automatically.
WHEN THE CALLER’S PHONE
NUMBER HAS A DIFFERENT AREA
CODE FROM THE PRESET:
The long distance dialing digit ‘1’ will be inserted automatically
during Caller ID memory call back.
Press [CALL BACK], 11 digits number will blink. Press [CALL
BACK] again to confirm to dial the 11 digits number.
WHEN THE CALLER’S PHONE
NUMBER HAS THE SAME AREA CODE
AS THE PRESET:
The long distance dialing digit ‘1’ and the 3 digits area code will
be deleted automatically during Caller ID memory call back.
Press [CALL BACK], 7 digits number will blink. Press [CALL
BACK] again to confirm to dial the 7 digits number.
NOTE:
Your telephone company may require a different format
for making out-of-area (toll) calls WITHIN your area code. See
the next section for the procedure to obtain the applicable toll-
call format for your phone company.
WHEN YOUR TELEPHONE COMPANY REQUIRES YOU TO
DIAL OTHER THAN A 7-DIGIT NUMBER (SAME AREA
CODE) OR 11-DIGIT NUMBER (DIFFERENT AREA CODE)
TO MAKE TOLL CALLS WITHIN YOUR AREA CODE,
FOLLOW ONE OF THE 4 OPTIONS BELOW FOR CALLER
ID CALL BACK.
Option 1
1+Area Code+7-Digit Number (11 digits)
Option 2
1+7-Digit Number (8 digits)
Option 3
Area Code+7-Digit Number (10 digits)
Option 4
7-Digit Number Only.
Follow the procedure below to select one of the above
options for Caller ID call back.
With the handset hung up on the base.
1 Press [ ] or [ ] to find the Caller ID memory location to redial.
Press [CALL BACK], the 7-digit number (if same area code)
or 11-digit number (if different area code) will blink.
2. Press [ ] or [ ] to select one of the options.
3. Press [CALL BACK] again to confirm the dial.
