background image

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath

tub, wash bowl, kitchen sink or laundry tub, in a wet basement
or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during

an electrical storm. There may be a remote risk of electric
shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity

of the leak.

4. Use only the power cord and batteries indicated in this manual.

Do not dispose of batteries in a fire. They may explode. Check
with local codes for possible special disposal instructions.

SAVE THESE  INSTRUCTIONS

1

2

3

LOCATION OF CONTROLS

1. Receiver

2. Receiver Volume Control

3. Hook Switch

4. Keypad

5. Tone/Pulse Switch

6. Redial Button

7. Transmitter / Mic

8. Store Button

9. Memory Button

10. New Call LED

11. Ringer Hi/Lo/Off Switch

12. LCD Display

13. Battery Compartment

14. Review   /   Button

15. Erase Button

16. Call Back Button

14

13

12

15

11

2

3

5
6
7
8

9

4

16

1

CONGRATULATIONS!

You have purchased a CID110, Caller ID Telephone with 10-
Memory Dialing manufactured to the highest standards of
Conairphone

TM

. Before installing and operating, be sure to read

this manual.

GENERAL INFORMATION

UNPACKING

This package contains:
• CID110 Caller ID Telephone with 10-Memory Dialing
• Owner’s Manual
• Fully Modular Coil Cord
• Fully Modular Telephone Line Cord (Long Straight Cord)
• Fully Modular Telephone Line Cord (Short Straight Cord)
• Quick Installation Guide
• Important Notice
• Two (2) Memory Index Labels
• Warranty Card

If anything is missing or damaged, contact the place of purchase.
Keep the packaging to transport telephone.

For your reference, keep a record of the date purchased.
Please save the sales receipt for the warranty reference.

Date of Purchase ___________________________

INSTALLATION INSTRUCTIONS

Follow these precautions:

a. Never install telephone wiring during a lightning storm.
b. Never install telephone jacks in wet locations unless the jack

is specifically designed for wet locations.

c. Never touch uninsulated telephone wires or terminals unless

the incoming telephone line has been disconnected at the
network interface.

d. Use caution when installing or modifying telephone lines.

10

Summary of Contents for ConairPhone CID110








Reviews: