SET THE DIP SWITCH
The ES7110 has a 10-pin DIP switch located on the bottom panel to configure
the Port Link Alarm for the Ethernet ports. The following table shows the DIP
switch number mapping to the corresponding
PoE and Gigabit ports as follows.
Port G2
Port G1
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Port 7
Port 8
DIP 1
DIP 2
DIP 3
DIP 4
DIP 5
DIP 6
DIP 7
DIP 8
DIP 9
DIP 10
The port break alarm is limited to an auto-negotiation 10/100 full-duplex
device.
3
Maximum 1A/24VDC
Alarm System
Extra Power
System
Port Alarm
Earth Ground
