INTRODUCTION
The RocketLinx ES7110 series is an industrial Power over Ethernet (PoE)
switch with eight Fast Ethernet ports and two Gigabit uplink ports to ensure
high-bandwidth connection. The ES7110 is compliant with the IEEE 802.3af
PoE standard to deliver a maximum of 15.4 W per port with a total output
power budget of 65W. The ES7110 series offers the following models:
•
ES7110 - with eight Fast Ethernet PoE ports and two RJ45 Gigabit uplink
ports (48VDC)
•
ES7110-VB - with eight Fast Ethernet PoE ports and two RJ45 Gigabit
uplink ports (12-24VDC)
To ensure the high quality of video data transmission, the ES7110 not only
provides Gigabit bandwidth uplink for large image traffic, but also supports
QoS to adjust the priority of data transfer. Using the Fault Relay, the
ES7110 can automatically warn the administrator if there are any failures.
The compact IP30 rigid aluminum case allows the ES7110 to be reliably
operated in an extreme environment. Refer to the Comtrol website for more
information about specific ES7110 model features.
WIRE THE POWER
Use the following procedure to wire the power.
1. Insert the positive and negative wires (12-24AWG) into the
PWR+
and
PWR-
contacts.
Note:
Power should be disconnected from the power supply before connecting it to
the switch. Otherwise, your screwdriver blade can inadvertently short your terminal
connections to the grounded enclosure.
2. Tighten the wire-clamp screws to prevent the wires from coming loose.
1
