42 -
DeviceMaster UP User Guide
: 2000451 Rev. C
RedBoot Procedures
Determining the Bootloader Version
Determining the Bootloader Version
Use the following procedure to determine what bootloader version is loaded in the
DeviceMaster UP.
1.
Establish communications with the DeviceMaster UP using the serial (Page
39) or telnet (Page 40) method.
2.
At the
RedBoot
prompt, type
version
.
The bootloader information will display.
3.
To update the bootloader on the DeviceMaster UP, make sure that you
download the latest version and see
4.
Type
reset
to reset the DeviceMaster UP, if you do not have any other related
Redboot tasks.
Resetting the DeviceMaster UP
When you have completed your tasks in Redboot, you must enter a
reset
command
at the
RedBoot
> prompt for the DeviceMaster UP to begin operation.
Note:
The LEDs on the DeviceMaster UP will go through the power up sequence.
The unit has completed its reset cycle when the PWR or Status LED is lit
and it stops flashing.
RedBoot> version
Comtrol DeviceMaster Boot Version 1.20
RedBoot(tm) debug environment - built 14:57:53, Jun 21 2004
Platform: Comtrol DeviceMaster (ARM 7TDMI)
Portions Copyright (C) 2000. Red Hat, Inc.
Portions Copyright (C) 2001-2004. Comtrol Corp.
RedBoot>
