Comtrend Corporation WAP-EN300C, User Manual, Page: 99 / 109

IV-7-3-2. Date and Time
You can configure the time zone settings of your access point here. The date
and time of the device can be configured manually or can be synchronized
with a time server.
Date and Time Settings
Local Time Set the access point’s date and time manually
using the drop down menus.
Acquire Current
Time from your PC
Click “Acquire Current Time from Your PC” to
enter the required values automatically
according to your computer’s current time and
date.
NTP Time Server
Use NTP The access point also supports NTP (Network
Time Protocol) for automatic time and date
setup.
Server Name Enter the host name or IP address of the time
server if you wish.
Update Interval Specify a frequency (in hours) for the access
point to update/synchronize with the NTP
server.
Time Zone
Time Zone Select the time zone of your country/ region. If
your country/region is not listed, please select
another country/region whose time zone is the
same as yours.