Comtrend Corporation L9VVR3060U, User Manual

Page: 95 / 121

94
Field
Description
Traffic Class Name Enter a name for the traffic class.
Rule Order Last is the only option.
Rule Status Disable or enable the rule.
Classification Criteria
Ingress Interface
Select an interface: (i.e. LAN, WAN, local, ETH1, ETH2,
ETH3, wl0)
Ether Type Set the Ethernet type (e.g. IP, ARP, IPv6).
Source MAC Address A packet belongs to SET-1, if a binary-AND of its source
MAC address with the Source MAC Mask is equal to the
binary-AND of the Source MAC Mask and this field.
Source MAC Mask This is the mask used to decide how many bits are checked
in Source MAC Address.
Destination MAC
Address A packet belongs to SET-1 then the result that the
Destination MAC Address of its header binary-AND to the
Destination MAC Mask must equal to the result that this
field binary-AND to the Destination MAC Mask.
Destination MAC Mask This is the mask used to decide how many bits are checked
in the Destination MAC Address.
Classification Results
Specify Egress
Interface
Choose the egress interface from the available list.
Specify Egress Queue Choose the egress queue from the list of available for the
specified egress interface.
Mark Differentiated
Service Code Point The selected Code Point gives the corresponding priority to
packets that satisfy the rule.
Mark 802.1p Priority Select between 0-7.
- Class non-vlan packets egress to a non-vlan interface will
be tagged with VID 0 and the class rule p-bits.
- Class vlan packets egress to a non-vlan interface will
have the packet p-bits re-marked by the class rule p-bits.
No additional vlan tag is added.
- Class non-vlan packets egress to a vlan interface will be
tagged with the interface VID and the class rule p-bits.
- Class vlan packets egress to a vlan interface will be
additionally tagged with the packet VID, and the class rule
p-bits.
Set Rate Limit The data transmission rate limit in kbps.