16
3.3 Login Procedure
Perform the following steps to login to the web user interface.
NOTE:
The default settings can be found in section
3.1 Default Settings
.
STEP 1: Start the Internet browser and enter the default IP address for the device
in the Web address field. For example, if the default IP address is
192.168.1.1, type
http://192.168.1.1.
NOTE:
For local administration (i.e. LAN access), the PC running the browser
must be attached to the Ethernet, and not necessarily to the device.
For remote access (i.e. WAN), use the IP address shown on the
Device
Information
screen and login with remote username and password.
STEP 2: A dialog box will appear, such as the one below. Enter the default
username and password, as defined in section
3.1 Default Settings
.
Click
OK to continue.
NOTE: The login password can be changed later (see section
8.6.1 Accounts
).
Summary of Contents for L9VVR3060U
