Preface
This manual provides information related to the installation, operation, and
application of this device. The individual reading this manual is presumed to have a
basic understanding of telecommunications terminology and concepts.
If you find the product to be inoperable or malfunctioning, please contact technical
support for immediate service by email at
For product update, new product release, manual revision, or software upgrades,
please visit our website at
Important Safety Instructions
With reference to unpacking, installation, use, and maintenance of your electronic
device, the following basic guidelines are recommended:
•
•
•
•
•
•
•
•
•
Do not use or install this product near water, to avoid fire or shock hazard. For
example, near a bathtub, kitchen sink or laundry tub, or near a swimming pool.
Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).
Do not connect the power supply cord on elevated surfaces. Allow it to lie freely.
There should be no obstructions in its path and no heavy items should be placed
on the cord. In addition, do not walk on, step on, or mistreat the cord.
Use only the power cord and adapter that are shipped with this device.
To safeguard the equipment against overheating, make sure that all openings in
the unit that offer exposure to air are not blocked.
Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightening. Also, do not use
the telephone to report a gas leak in the vicinity of the leak.
Never install telephone wiring during stormy weather conditions.
CAUTION:
To reduce the risk of fire, use No. 26 AWG or larger telecommunication line cord.
Always disconnect all telephone lines from the wall outlet before servicing or
disassembling this equipment.
Although the light intensity of the fiber optic laser is low, there may still be a
small risk of damage to your eyes, especially if you wear glasses or contact
lenses. To increase your safety, you can take the following precautions:
o
Before turning on the equipment and connecting to the GPON port, check
that the fiber optic cable is not visibly damaged.
o
Never look straight into the cable or GPON port under any circumstances,
even if no light is visible, since laser light is invisible to the human eye!
WARNING
Disconnect the power line from the device before servicing.
Power supply specifications are clearly stated in
.
Copyright
Copyright©2008 Comtrend Corporation. All rights reserved. The information
contained herein is proprietary to Comtrend Corporation. No part of this document
may be translated, transcribed, reproduced, in any form, or by any means without
prior written consent of Comtrend Corporation.
1
