Comtrend Corporation CT-5372E, User Manual

Page: 101 / 134

Chapter 8 Diagnostics
The Diagnostics menu provides feedback on the connection status of the CT-5372E
and the ADSL link. The individual tests are listed below. If a test displays a fail
status, click
Rerun Diagnostic Tests at the bottom of this page to make sure the
fail status is consistent. If the test continues to fail, click Help and follow the
troubleshooting procedures.
Test Description
Ethernet Connection Pass: indicates that the Ethernet interface from your
computer is connected to the LAN port of your DSL Router. A
blinking or solid green LAN LED on the router also signifies
that an Ethernet connection is present and that this test is
successful.
Fail: Indicates that the DSL Router does not detect the
Ethernet interface on your computer.
USB This option is for future release.
ADSL
Synchronization Pass: Indicates that the DSL modem has detected a DSL
signal from the telephone company. A solid WAN LED on the
router also indicates the detection of a DSL signal from the
telephone company.
Fail: indicates that the DSL modem does not detect a signal
from the telephone company’s DSL network. The WAN LED
will stop blinking (i.e. training) and the LED will switch off.
100