Comtrend Corporation CT-535 User Manual Download Page 82

Page: 82 / 92

6.2 System

Statistics

To view the system statistics, click on the

System Statistics

button located near the

bottom of the menu-bar. Statistics are recorded regarding Interfaces, TCP-IP, and

DHCP-Lease.

6.2.1 Interface Statistics

To display the interface statistics, click the

Interface

tab, located at the top-left of

the System Statistics screen. The Interface Statistics page displays statistics for all
interfaces. The following information is displayed:

Interface Name

The name of the interface

Admin Status

Indicates whether the interface is Up or Down

Octets In

The number of Octets (bytes) recieved

Unicast PktsIn

The number of unicast packets received

Broadcast PktsIn

The number of broadcast packets received

Discards In

The number of packets received that were discarded

Errors In

The number of inward errors

Octets Out

The number of Octets (bytes) transmitted

Unicast PktsOut

The number of unicast packets transmitted

Broadcast PktsOut

The number of broadcast packets transmitted

Discards Out

The number of packets transmitted that were discarded

Errors Out

The number of outward errors

Summary of Contents for CT-535





























































































Search results

Summary of Contents for CT-535

Reviews:

Related manuals for CT-535

Brands by name

Popular brands

Comtrend Corporation CT-535, User Manual

Search results

Summary of Contents for CT-535

Reviews:

Related manuals for CT-535

Brands by name

Popular brands