Comtrend Corporation CT-535 User Manual Download Page 41

Page: 41 / 92

5.2 VLAN

To configure the VLAN function, click

VLAN

from the Advanced menu bar. The

following parameters are displayed:

Parameters:

VLAN

Select

enable

disable

to activate/deactivate the VLAN function.

Forward DB Type

: Used to configure the forwarding database learning type.

There are two types of learning for the FDB: Multi and Single.

Multiple:

the learned entries will be distributed to five databases, (VLAN 1~4 and

non-VLAN)

Single:

the learned entries will be collected into a single database.

IGMP Snooping:

Select

enable

disable

to activate/deactivate IGMP

snooping.

VLAN:

Check the VLAN interface to enable it or uncheck it to disable it.

Ethernet Port:

Select the LAN interfaces you wish to attach to each VLAN.

Note

that each LAN interface can only be attached to one VLAN.

PVC:

Select the VCI/VPI value for the VLAN, you can only select from values that

have been configured as Bridge mode on the WAN interface (refer to section 4.4,
WAN Setup).

Action:

Click the

Set

button to apply the settings, or click the

Clear

button to

delete a VLAN group.

Summary of Contents for CT-535





























































































Search results

Summary of Contents for CT-535

Reviews:

Related manuals for CT-535

Brands by name

Popular brands

Comtrend Corporation CT-535, User Manual

Search results

Summary of Contents for CT-535

Reviews:

Related manuals for CT-535

Brands by name

Popular brands