Comtech EF Data Radyne DMD1050, Installation And Operation Manual

Page: 169 / 183

DMD1050 Satellite Modem Board Ethernet Data Interface
F.7 Remote Monitor and Control via SNMP
Simple Network Management Protocol (SNMP) is the most widely used protocol for network
management available today. It provides a secure, open network standard whereby a PC with a
MIB Browser can be used to monitor and control almost any Cisco router, gateway, or Radyne
modem. And because the Enhanced Ethernet Interface offers a multi-port Ethernet interface and
daisy chain capability, every modem, even those in complex point to multi-point systems, can be
easily controlled from one central location. All without requiring extensive network setup or
additional equipment at every remote site.
Figure F-6 illustrates complete Monitor and Control of all Radyne equipment from a centrally
located PC at the Hub.
Hub
DMD50
DMD50
DMD50
52
Mbps
52
Mbps
5
Mbps
52
Mbps
2
Mbps
256
kbps
M&C
M&C
M&C
Remote
LAN
Switch
DMD 50
DMD 20
DMD20
52
Mbps
5
Mbps
Router
2
Mbps
256
kbps
M&C
M&C
M&C
Daisy Chain
Daisy Chain
Router
LAN
Remote
LAN
Router
Router
Remote
LAN
Figure F-6 – Remote Monitor and Control
MN-DMD1050 F–7
Revision 9