Comtech EF Data KST-2000A, Installation And Operation Manual

Page: 165 / 182

Ku-Band Satellite Transceiver Revision 9
FSK Remote Control Commands MN/KST2000AB.IOM
E-13
Parameter
Type Command
(Instruction
Code and
qualifier) Arguments for
Command or
Response to
Query Description of arguments
(note that all arguments are ASCII numeric codes, that is,
ASCII codes between 48 and 57) Response to Command (target to controller) Query
(Instruction
Code and
qualifier)
Down Slice
Information
String n.a. 41 bytes Query only.
<add/DIF?’cr’
>add/DIF=fffff,bbbb,iii,aa,llll,gg,s,pp,rr,www,cc,’cr’lf’
Where: fffff=Start freq in MHz
bbbb= Freq range in MHz (bandwidth)
iii=IF freq in MHz
aa=max attenuation
llll=IFLO
gg= Cal GAIN in dB
s= o for Lowside LO, 1 for Highside LO
pp=rated output power in dBm
rr=max expected Raw Gain in dB
www=Channel bandwidth in MHz
cc=Allowed user atten range in dB
Ex: DIF=10950,1800,070,20,1180,45,1,10,57,036,20,
DIF= (message ok)
DIF? (received ok, but invalid argument found)
DIF* (message ok, but not permitted in current
mode) DIF?