Comtech EF Data HPOD, Installation And Operation Manual

Page: 64 / 161

HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Revision 9
Ethernet-Based Remote Product Management 4–13 MN/HPOD.IOM
System Account Access Information

Read Only / Read/Write / Admin Names and Passwords – These defaults, set at the
factory, may be changed as needed:
Field
Factory Default
Name / Password
Maximum
Characters
Format
Read Only Name / Password monitor / 1234
10 alphanumeric Read/Write Name / Password opcenter / 1234
Admin Name / Password comtech / comtech

SMTP Server – Set the mail server IP address from where you want to send e-mail, in the
form 0.0.0.0 .

SMTP Domain Name / Destination – The Administrator must assign the SMTP Domain
Name and Destination.
Click [Submit Access] to save these settings or click [Reset] to revert to the previously assigned
System Account Access Information settings.
Webpage Timeout
This is the maximum amount of time that the computer can remain idle before the session logs
out. After the timeout occurs, you must log in to the Web Server Interface again.
Use the drop-down list to select 8 Hours or 5 Minutes (default), and then click [Change] to save.