CDM-600L Satellite Modem
Revision 0
Front Panel Operation
MN/CDM600L.IOM
6–10
If
TARGET-EbNo/RANGE
is selected, the following menu will be displayed:
Edit Procedures:
•
Edit the target Eb/No of the remote modem. The default value is 3.0 dB, and
upper limit is 9.9 dB.
•
Edit the maximum permitted increase in power level when in AUPC mode. The
default value is 1dB, and upper limit is 9 dB.
•
Press ENTER.
If
ALARM ACTION
is selected, the following menu will be displayed:
Select the action that will occur if the AUPC causes the maximum output power level to
be reached, either NONE or Tx ALARM.
Select the action that will occur if the remote demod is unlocked. The choices are: NOM-
PWR (Nominal Power), where the output level will revert to the nominal power level set
under MANUAL, or MAX-PWR, (Maximum Power), where the ouput level will change
to the maximum permitted.
Press ENTER.
CONFIG: TX: ENCODER
Select the parameter to edit using the [
←
] [
→
] arrow keys.
The Encoder options are shown in the parentheses. Select using the [
↑
] [
↓
] arrow keys,
then press ENTER. The choices are:
•
Viterbi
•
Sequential
•
Trellis Coded Modulation – 8-PSK Rate 2/3 only
(FAST option)
•
Turbo
(Hardware option)
•
None (uncoded)
ENCODER = TURBO (NONE,VIT,SEQ,TCM,TURBO)
REED-SOLOMON= OFF (ON,OFF)
MINIMUM EbNo OF REMOTE MODEM = 5.0dB
MAXIMUM PERMITTED POWER INCREASE = 9dB
MAX TX PWR ACTION = NONE (NONE, TX-ALM)
REM DEMOD UNLOCK ACT = NOM-PWR(NOM, MAX)
Summary of Contents for CDM-600L
Page 2: ......
Page 4: ......
Page 206: ...2114 WEST 7TH STREET TEMPE ARIZONA 85281 USA 480 333 2200 PHONE 480 333 2161 FAX ...
