Computer Weld Technology Micro ADM, Operation & Installation Manual

Page: 34 / 58

NetHub JUMPER and TERMINAL BLOCK LOCATION DIAGRAM
Terminal Block
TB4 - Remote I/O
Terminal Block
TB3 - Net In
Terminal Block
TB2 - Net Out
Terminal Block
TB1 - AC Power
Fuse F1
1 Amp
Jumper JMP1
110/220 AC
Terminal Block
TB5 - Port 1
Terminal Block
Terminal Block
TB6 - Port 2
Terminal Block Terminal Block Terminal Block
TB9 - Port 5 TB7 - Port 3 TB8 - Port 4 TB10 - Port 6
JUMPER JMP1 - 110/220VAC
VOLTAGE JUMPERS
110VAC A and B
220VAC C
The next two jumpers (JP1 and JP2) are for
whether the RS-485 Converter is powered
from an external power source or uses the
power supplied by the NetHub.
JUMPER JP1 - NPWR
POWER JUMPERS
External Powered A
NetHub Powered A and B
JUMPER JP2 - NCOM
POWER JUMPERS
External Powered A
NetHub Powered A and B
TERMINAL BLOCK TB1 – AC POWER
PIN REFERENCE WIRE COLOR
1 HOT BLU
2 EARTH GRN/YEL
3 NEU
BRN
TERMINAL BLOCK TB2 – NET OUT
TERMINAL BLOCK TB3 – NET IN
PIN REFERENCE WIRE COLOR
1 NET PWR ORG
2 NET+ BLU
3 NET- WHT/BLU
4 NET
COM WHT/ORG
5 EARTH GND SHIELD
Note: Cable shield to be clipped off.
TERMINAL BLOCK TB4 – REMOTE
PIN REFERENCE WIRE COLOR
1 RMT P1 WHT
2 RMT P2 BRN
3 RMT P3 GRN
4 RMT P4 YEL
5 RMT P5 GRY
6 RMT P6 PNK
7 +12 VDC BLU
8 +12VDC RED
TERMINAL BLOCK TB5 – PORT 1
TERMINAL BLOCK TB6 – PORT 2
TERMINAL BLOCK TB7 – PORT 3
TERMINAL BLOCK TB8 – PORT 4
TERMINAL BLOCK TB9 – PORT 5
TERMINAL BLOCK TB10 – PORT 6
PIN REFERENCE WIRE COLOR
1 +12V BRN
2 NET+ WHT
3 NET- BLU
4 REMOTE ON BLK
5 GND GRY
Note: Cable shield to be clipped off.
30