Computer Weld Technology Micro ADM, Operation & Installation Manual

Page: 19 / 58

The following is a summary of the two special command functions. They are
used to set and read the Micro ADM™ Real Time Clock (RTC). To read the
current Time type the following command:
From Host type: T? (cr)
Response from Micro ADM™: hh:mm:ss
Where: hh is the current hour, mm is the current
minute and ss is the current second. (cr) is
the enter key
To set the time (hour/minute/second) type: T=10:17:35 (cr) Entire field must be
completed as explained below:
Type 6:45 am as T=06:45:00 (cr)
Type 7:25 PM as T=19:25:00 (cr)
Note: “cr” denotes carriage return (Enter)
To read the current Date type the following command:
From Host type: D? (cr)
Response from Micro ADM™: mn:dd:yy
Where: mn is the current month, dd is the current
day and yy is the current year, (cr) is the
enter key
To set the date (year/month/day) type: D=99/06/01 (cr). The Entire field must be
completed as explained below:
Type February 4, 1999 as D=99/02/04(cr)
Type November 23, 2000 as D=00/11/23(cr)
Note: “cr” denotes carriage return (Enter)
15