11
•
For 240 V single-phase pumps use a H07 RN-F3 1.5 mm-type connection hose.
•
Before connecting the motor, check the necessary fuse type.
•
Check the correct arrangement and connection of the earth wire in the equipment
installation.
•
It is very important to keep to the installation and electrical connection conditions.
Should they not be heeded, the pump manufacturer does not accept any
responsibility and considers the guarantee void.
•
Special installation regulations may exist.
•
The main cable can only be connected by qualified and authorised personnel.
•
Incorrect mains connection could result in death.
4. START-UP INSTRUCTIONS
QUESTIONS PRIOR TO START-UP
•
Before starting up the pump, carry out the following operations:
1. Take off the pre-filter cover, unscrewing the nut that holds it (See Fig.5).
2. Fill the pump with water through the pre-filter until it dips into the suction tube.
3. If, during these operations the basket should have been taken out, do not
