4
•
While connecting electrical cables to the machine’s motor, take care of the
mechanism inside the connection box, check that no pieces of cable remain inside
after closure and that the earth contact is correctly connected. Connect the motor
using the electrical diagram attached to the machine.
•
Check that the electrical cable connections to the machine’s terminal box are well
set and firmly attached to the connection terminals.
•
The pump electrical installation should have a differential the value of which is not
greater than 30mA.
•
Check that the terminal box joint is used correctly, thus preventing water from
entering the terminal box of the electric motor. Likewise, check that the packing
gland has been placed and pressed correctly inside the joint.
•
Special attention should be paid to ensure that under no circumstances water gets
into the motor and the electric voltage parts.
•
Should the envisages use not be different from that mentioned, adaptations and
supplementary technical regulations may be necessary in case the envisage use
would be different.
STARTING-UP WARNINGS
