Compu Pool Infinity Series Manual AU
16
9.3.7
7. Output.
Pressing the "+" or "-" buttons will change the chlorine production output
in 10% increments. Note: When initially starting up your Infinity chlorine generator it
is recommended that the output be set at 100%, decreasing in 10% increments
ensuring that the unit is maintaining the appropriate chlorine level in your pool/spa.
9.3.8
7. Manual Pump Override.
To override the time clock, switch the unit off, via the
On / Off button. Once the unit is off, simply press the "+" button, this will allow the
pump to run continually without chlorination.
9.3.9
8. Left and Right Arrows.
Pressing the LEFT or RIGHT arrow buttons will enable
navigation through the menu options.
9.4
Control Panel LED Indicators
9.4.1
Power On.
When illuminated, the Infinity Series unit has input power activated.
9.4.2
Polarity 1 & 2.
One Polarity LED at a time will be illuminated indicating which
operation cycle the unit is on. The system automatically switches polarities in order
to inhibit the build up of calcium and other minerals on the cell as part of the self-
cleaning feature.
9.4.3
Water Fault.
When illuminated, the flow sensor has detected no water flowing. The
display will read “No Flow”. The system will have stopped producing chlorine as a
safety measure. Severe low salt co
nditions will also activate the “Water Fault”
warning light.
9.4.4
Low Salt.
The Infinity Series will automatically let you know if the salinity
concentration has fallen below acceptable levels. When illuminated for more than
two hours, add more salt as needed. The amount required varies with pool size.
Refer to Table 1 to determine additional amount of salt needed. An accurate salinity
reading is best determined by taking a water sample to a pool professional.
9.4.5
High Salt.
When illuminated, the salt content is more than sufficient. The Infinity
Series has a built-in regulating system that enables it to continue to produce
chlorine with the increased salt content. At this point do not add any further salt
and allow the salt content to return to desirable levels.
9.5
Home Screen
9.5.1
The Home Screen is the screen displayed during normal operation of the Infinity
chlorine generator. The following is displayed on the home screen:
9.5.2
Time:
To change the Time, access the User Menu (see section 9.6).
9.5.3
Chlorine Output Setting Percentage:
To change the chlorine output setting, use
the "+" and "-" buttons. The setting will be changed in 10% increments.
