v1.0
www.compressedairalliance.com
13
Standard Condensate Drain
User Manual v1
2.
Connect the cable to your alarm device, any device of your choice can be applied i.e. a (flashing)
light or alarm panel.
3.
Connect your alarm device to a power supply. The alarm switch type is a ‘contact output switch’. An
external power supply is required as the alarm connection point on the drain works like a relay
switch only.
4.
Connect the power supply to the drain alarm connector to close the circle. Replace the connector
and tighten the connector screw (Max. torque 0.3Nm). Make sure the gasket is secured properly to
ensure IP65 rating.
