v1.0
www.compressedairalliance.com
12
Standard Condensate Drain
User Manual v1
Alarm
The drain is equipped with an alarm feature. The alarm feature can be connected to an external alarm
device with its own power supply.
Alarm Cycle
The alarm is triggered when the drain has to open too many times consecutively (20* without a pause),
see
“
section 1
” in the diagram below
. The reason for the alarm may be debris (rust) particles blocking
the valve inside the drain, indicating a service interval is required.
If the alarm has been activated, the drain will open for two times and run a diagnostic cycle, see
“
section 2
” in the diagram below
. After the alarm cycle, the alarm will be deactivated automatically and
the drain will return to its normal operation. If the reason for the alarm has not been solved, the drain
will repeat the alarm cycle.
Optional - Connecting to an External Alarm
1.
Unscrew the bottom alarm connector screw and remove the cap from the bottom alarm connector
to connect the alarm cables to the alarm connector as shown below. Caution is required as you
may be working with hazardous voltages!
