v1.0
www.compressedairalliance.com
11
Standard Condensate Drain
User Manual v1
Step 1.5
–
Connect power
Unscrew the connector screw and remove the cap from the connector to connect your power cable as
illustrated in Figure 1.5 below.
Replace the power connector, tighten the connector screw (max. torque 0,3 Nm) and turn on the power
supply.
Make sure the gasket is secured properly to ensure IP65 rating.
Step 1.6
–
Open ball valve
Slowly open the ball valve to restore normal system pressure.
The drain is now under pressure!
Step 1.7
–
Test the drain
Press and hold down the TEST button to check the valve function.
A purging sound must be heard.
Step 1.8
–
Your condensate drain is now ready.
