14
7 Presentation Switcher / Scaler Buttons
The
CVG-724xl
includes the following front panel buttons:
Eight INPUT SELECTOR buttons
1
, see section 7.1
A PIP button
2
, see section 7.2
BLANK, MUTE and FREEZE buttons
Six OSD buttons
A RESET TO VGA button
A PANEL LOCK button, see section 7.3
7.1 Switching an Input
Each INPUT SELECTOR button can be used to select the source. It can also
be programmed to freeze the image or display a blank screen when pressed
again. Refer to section 8.5.9 for details.
You can switch seamlessly
3
between each input
4
that is connected to a source,
by pressing the appropriate INPUT SELECTOR button. The OSD status
appears superimposed over the top right corner of the screen for a few
seconds, as Figure 9 illustrates:
AV-2
Auto(NTSC System)
Figure 9: OSD Input Status
1 The CVG-719xl and CVG-720xl have seven INPUT SELECTOR buttons
2 Not available on the CVG-719xl
3 For glitchless transitions between inputs
4 To set the image transition speed (fast, safe or moderate), see section 8.5.5
