Comprag AV-Series, Operating Manual

Page: 22 / 96

22
Version 1.1
SEQ PARAM SET — group parameters
GRP MST/FOLLOWER Options: master / follower (slave).
GRP MODE V-V/V-F Options: individual operation / group.
GRP NUMBER 0002 Number of the compressor within the group.
GRP SWITCH 0099H
GRP LD 05.2 BAR Group load pressure.
GRP ULD 08.0 BAR Group idle run pressure.
GRP DELAY 0020s
Group delay, wait time until next compressor switches.
RST MAINT TIME — resetting of the maintenance hours counter
OIL FILTER
0000H
Oil filter maintenance. Set to 0 after maintenance.
SEPARATOR
0000H
Separator maintenance. Set to 0 after maintenance.
AIR FILTER
0000H
Air filter maintenance. Set to 0 after maintenance.
OIL
0000H
Oil. Set to 0 after changing.
GREASE M1
0000H
Lubricate motor bearings. Set to 0 after maintenance.
BELTS
0000H
Change belts. Set to 0 after maintenance.
MAX RUN TIME — set maintenance intervals.
OIL FILTER
0500H
Oil filter maintenance. Set maintenance interval.
SEPARATOR
4000H
Separator maintenance. Set maintenance interval.
AIR FILTER
2000H
Air filter maintenance. Set maintenance interval.
OIL
0500H
Oil. Set change interval.
GREASE M1
4000H
Lubricate motor bearings. Set maintenance interval.
BELTS
4000H
Change belts. Set to 0 after maintenance.
USER PASS — user password
ENTER PASSWORD ****
No access to parameter
LANG. — language
LANGUAGE ........ EN/DE
If there is no activity for 60 seconds in the current menu, the control will automatically return to the main menu.