Comprag 14310000, Operating Manual

Page: 15 / 80

15 COMPRAG RDX series compressed air refrigerated dryer
3.3 Preparation of facility
Remove the dryer from the pallet.
Ensure that the floor of the facility can withstand the weight of the dryer. Install the dryer
on a level surface that is able to bear its weight.
Regulate the horizontal axis of the dryer using a leveling instrument. The gradient from
the horizontal surface must not exceed 3
0
. Install the dryer in a facility in which precipita-
tion cannot permeate. Choose a facility for installing the dryer with a minimum level of dust.
Install the dryer at least 1.5 m from a wall. A minimum 0.5 m should be allowed between
the rear side of the dryer and a wall. The facility in which the dryer is installed must be
good ventilated or fitted with a combined extract-and-input ventilation system.
3.4 Preparation of compressed-air line
Connect the dryer to the compressed-air line. Provide the throughput capacity of the
compressed-air line in accordance with the capacity of the dryer.
All components of the compressed air line must have a working
pressure no less than the dryer’s nominal pressure.
Connection symbols
IN OUT