Comprag 11410101, Operating Manual

Page: 35 / 108

35 COMPRAG Screw air compressor F-Series
Fig. 5.8 Cleaning radiator
Fig. 5.7 Changing air-oil separator
5.7 Changing air-oil separator
Open the right side panel, remove the
separator (1) using a special oil filter
wrench.
Oil the gasket of the new air-oil separator
and screw it into place. Only tighten the
air-oil separator by hand.
5.8 Cleaning radiator
In order to access the radiator (1), open
the front panel.
Regularly clean the radiator in order to
maintain its cooling efficiency at an ac -
ceptable level.
Remove any dirt particles from the radiator
using a fibre brush, then aim a jet of
compressed air at the radiator from the
bottom to the top; the jet should be held
at an approximate 90° angle to the plane
of the radiator.
1
1