background image

‘New Rookie’

Thank you very much for purchasing our Composite-ARF ‘New’ Rookie, made with the revolu-
tionary Total Area Vacuum Sandwich (TAVS) technology.

The ‘new’ Rookie is an updated and ‘facelifted’ version of our original kit, and includes a few sig-
nificant changes which definitely further improve the great flying characteristics, shorten the
assembly time ... and, in our opinion, make it it more beautiful!

Before you get started building and setting-up your aircraft, please make sure you have read this
instruction manual, and understood it. If you have any questions, please don’t hesitate to con-
tact your Rep, or C-ARF directly. Below are the contact details:

Email:

[email protected]

or

[email protected]

Telephone:

Phone your C-ARF Rep!!! He will be there for you.

Website:

http://www.composite-arf.com

Liability Exclusion and Damages

You have acquired a kit, which can be assembled into a fully working R/C model when fitted out
with suitable accessories, as described in the instruction manual with the kit.

However, as manufacturers, we at Composite-ARF are not in a position to influence the way you
build and operate your model, and we have no control over the methods you use to install,
operate and maintain the radio control system components. For this reason we are obliged to
deny all liability for loss, damage or costs which are incurred due to the incompetent or incorrect
application and operation of our products, or which are connected with such operation in any
way. Unless otherwise prescribed by binding law, the obligation of the Composite-ARF compa-
ny to pay compensation is excluded, regardless of the legal argument employed.

This applies to personal injury, death, damage to buildings, loss of turnover and business,
interruption of business or other direct and indirect consequent damages. In all circumstances
our total liability is limited to the amount which you actually paid for this model.

BY OPERATING THIS MODEL YOU ASSUME FULL RESPONSIBILITY FOR YOUR ACTIONS.

It is important to understand that Composite-ARF Co., Ltd, is unable to monitor whether you
follow the instructions contained in this instruction manual regarding the construction, operation
and maintenance of the aircraft, nor whether you install and use the radio control system
correctly. For this reason we at Composite-ARF are unable to guarantee, or provide, a
contractual agreement with any individual or company that the model you have made will
function correctly and safely. You, as operator of the model, must rely upon your own expertise
and judgement in acquiring and operating this model.

Composite-ARF New Rookie

[email protected]

2

Summary of Contents for New Rookie
























Reviews: