Compliance West MegaPulse Capacitor A PF Series, Instruction Manual

Page: 15 / 19

11
Figure 2. Controls, Indicators, Connectors – MegaPulse Capacitor series A PF Rear Panel
ITEM NO. NAME FUNCTION
1
Appliance Inlet / Fuse holder /
Power Switch
Use supplied cordset to connect the MegaPulse Capacitor series A PF tester to an appropriate source of supply.
Fuse holder provides access for Fuse replacement, and the Power Switch is used to turn the tester ON and OFF.
2
Fuse replacement warning /
Rating of power supply
Specifies replacement fuse and required supply voltage.
3 RS-232 Interface (Optional) Allow the communication between the tester and computer interface; a RS-232 to USB is available.
4 Interlock Switch
Emergency Stop
Close: Enables the tester buttons for operation.
Open: Stops any process in the tester and disables the buttons. The
TRIGGER and CHARGE Indicators will
be blinking
5 Product Information Product model and serial number
Table 2. Control, Indicators, Connectors – MegaPulse Capacitor series A PF Rear Panel