02
Connect the black ribbon data
cable of the eBOX to port
“5 Expansion Terminal” at the
bottom right of the eCLICK.
03
Connect the white ribbon data
cable of the eBOX to port 1 on
the left side of the eCLICK.
Communication via LAN or SIM
card can only be ensured when
the black and white ribbon data
cables are connected.
1
LAN 3 RJ45
(eBOX communication)
2a
LAN 2 RJ45
(to Internet router)
2b
LAN 2 LSA-Plus
(to Internet router)
3a
eSMARTMETER output
(optional)
3b
eSMARTMETER input
(optional)
4
Cable clip position
for S/FTP cable
5
RJ50 Terminal
(eBOX communication)
6
Grid control box connection
7
Shunt release connection
8
LAN 1 RJ45 (deactivated)
90°
3a
3b
1
8
2b
4
5
7
6
2a
Clicking the Compleo eBOX into the Compleo eCLICK | 7
Clicking the Compleo eBOX
into the Compleo eCLICK
Before mounting the eBOX, make sure
there is no voltage across the eCLICK.
01
If an eSMARTMETER is installed,
make sure the ports are connected
to the supplied data cable.
Connect port 3a (eSMARTMETER)
to port 3b (eCLICK) using the data
cable.
Take the eBOX and identify the
connecting points (blue here) on
its rear side.
