Charging process
04
The charging process is finished*
when the LED ring lights up white
again. After you have unlocked the
vehicle or the charging process has
ended, remove the charging cable,
which disconnects the eBOX from
the vehicle.
* Optionally, the charging process
can also be terminated by
presenting the previously used
RFID card again or via app (e.g.
app).
02
Authenticate the charging process
via RFID card or app (e.g.
app). For the latter, you need the
charging point number, which is
located on the front of the eBOX.
In addition, the eBOX can be
activated from the backend.
The charging process consists of connecting your vehicle to the eBOX, authenticating the charging process, charging your vehicle
and finally disconnecting your vehicle from the eBOX. Please make sure to carefully stow away any firmly connected cables after use
(steps 1 and 2 are interchangeable).
01
Connect your electric vehicle to
the eBOX. To do this, plug the cable
into the eBOX first. Once your car
is successfully connected, the
vehicle LED will turn off and the
LED ring will light up white.
Proper use of charging cables
No charging cables with adapters
of any kind may be used on the
eBOX. The use of extension cables
is also not permitted.
03
Shortly after successful
authentication, the LED ring will
begin to pulse blue and your
vehicle will charge. After 10 seconds,
the authentication LED turns on
again. To save power, the ring is
switched off after a few minutes
when you move away from the
eBOX.
Charging process | 11
