Compleo eBOX professional Instructions For Use Manual Download Page 4

Important

eBOX bases have 
sharp edges. Do not 
grasp the eBOX by 
the bases. 

Important

Keep equipment 

pack away from small 

children. There is a 

risk that small parts 

could be swallowed 

by children, resulting 

in death. Do not 

install in the presence 

of children. 

Danger

Turn off circuit 
before remounting or 
replacing the eBOX.

Danger

Handling live 
components 
incorrectly may 
cause grievous 
injuries and death. 
So heed at all 
times the five safety 
rules under  
DIN VDE 0105:

• Disconnect from all 
power sources
•  Lock against 

reactivation

•  Verify zero voltage 

(all poles)

•  Earth and short 

circuit

•  Cover or 

partition-off 
adjoining live parts

Important

Technically non- 
functioning or 
defective charging 
infrastructure must 
not be used. In 
addition, do not 
use any charging 
infrastructure that 
does not comply 
with the intended 
use or the conditions 
specified by the 
manufacturer or 
which is not regularly 
checked.

Important

Ensure that no 
flammable or 
combustible 
materials are stored 
at a distance of 
less than 5 m 
from the charging 
infrastructure and 
that no fire is lit.

Important

When selecting the 
installation location, 
please ensure that the 
eBOX is not exposed 
to permanent sunlight.

Important

The contents of the 
delivery must be 
checked for 
completeness and 
intactness.

4 | Safety information

Safety information

Danger to life and limb

Warning of electrical voltage!

DANGER

Considerable risk of injury/ 

damage to property

IMPORTANT! There is a risk of 

injury or damage to property!

IMPORTANT

Information on optimising 

the application

Observing this information 

can improve the product’s 

application.

NOTE

Summary of Contents for eBOX professional





















Reviews: