background image

Copyright

This document contains information, which is protected by copyright. Reproduction, adaptation, or
translation without prior permission is prohibited, except as allowed under the copyright laws.

© Copyright 2014 Compex systems Pte Ltd.

All Rights Reserved.

Feedback

Please direct any comments or suggestions about this document to: [email protected]

Trademark Information

Compex® is a registered trademark of Compex Systems Pte Ltd. Microsoft Windows and the Windows logo
are the trademarks of Microsoft Corp. All other brand and product names are trademarks or registered
trademarks of their respective owners.

Disclaimer

Compex provides this manual without warranty of any kind, expressed or implied, including but not limited
to the implied warranties of merchantability and fitness for a particular purpose. Compex may make
improvements and/or changes to the product and/or specifications of the product described in this manual,
without prior notice. Compex will not be liable for any technical inaccuracies or typographical errors found
in this guide. Changes are periodically made to the information contained herein and will be incorporated
into later versions of the manual. The information contained is subject to change without prior notice.

Publication date and version

Published 4 March 2015. Manual version 1.0.0

Summary of Contents for WPJ558 HW














Reviews: