COMPASS HEALTH Richmar DQAPT User Manual Download Page 5

Page: 5 / 70

Foreword

Thank you for purchasing

DQAPT

from our company.

This manual has been written for the owners and operators of the

DQAPT

. It contains general information on the instructions for safety,

intended use, working principle, operation, maintenance, trouble

shooting, and warranty. In order to maximize the use, efficiency, and

working life of your unit, please read this manual thoroughly and become

familiar with the controls, as well as the accessories, before operating

the unit. This manual contains general safety, working principle,

operation, protocols guidance, maintenance, and trouble shooting for

the owners and operators of the

DQAPT

Specifications put fifth in this manual were in effect at the time of

publication. However, owing to policy of continual improvement by

Compass Health Brands, Corp., any changes to these specifications

may be made at any time without obligation on the part of Compass

Health Brands, Corp.

Before administering any treatment to a patient, the user of this

equipment should read, understand, and follow the information

contained in this manual for each mode of treatment available, as well

as the indications, contraindications, warnings, and precautions.

Operator Qualifications

DQAPT

is intended exclusively for use by medical specialists and is only

allowed to be used by qualified and instructed medical persons in a

Summary of Contents for Richmar DQAPT







































































Search results

Summary of Contents for Richmar DQAPT

Reviews:

Related manuals for Richmar DQAPT

Brands by name

Popular brands

COMPASS HEALTH Richmar DQAPT, User Manual

Search results

Summary of Contents for Richmar DQAPT

Reviews:

Related manuals for Richmar DQAPT

Brands by name

Popular brands