41
Adjust the Training Parameters during Training
During the training, if you need to change the training parameters,
please press
PAUSE
button, than the system will go to the ARM
STRENGTH TRAINING setup interface as picture follows. Adjust the
parameters then press
RESUM
button to start again.
2. Endurance Training
The ENDURANCE training is also a mode that system can automatically
switch between active and passive mode according to the patient's
training situation, designed to motivate the patient to move actively and
try to maintain the state of active movement, same as STRENGTH
training mode.
The difference with STRENGTH training is that ENDURANCE training
can set the training mileage. When the patient training reaches the set
mileage, the trainer will automatically stop and end the training.
Compared with the STRENGTH training, the game is also slightly
