47
Spasm Control
When you get a spasm during passive training, the trainer can identify
spasms and prompt "spasm" on the screen with sound prompt. When
the spasm protection is activated, the speed of the motor slows down to
zero and then change the rotation direction, slowly increased to the
original speed to relieve spasm.
When the spasm protection is activated more than 5 times, the device
will automatically stop the current training. Please stop training and take
a break.
Emergency Stop
The DQAPT is equipped with an Emergency Stop function.
During training, if the motor is out of control, please press the
emergency stop button immediately to stop training.
1)
Emergency stop
Press the emergency stop button nearby handlebar to break the
motor circuit. The trainer motor will stop immediately. Prompt
appears on the screen.
2)
Release emergency stop
Reset the emergency stop button by pulling out the red button.
Then the system will automatically enter the self-check interface.
